
This is a new era for Whoop drones. 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere. At this moment, the ESC board is updated from 10A to 12A. Supports 2S-3S battery now.
Main Features:
- Beta75X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
- With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing pro.
- Durable and light enough frame is customized for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.
- Whole drone no soldering or tinkering necessary. Customized lightest 1103 11000KV motors with cable connectors. Just plug and play.
- 350mAh 2S high rate battery is recommend by default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable
Weight: 41g (without battery)
Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Camera: Z02 AIO Camera 35 degree
Receiver Option: no include
Battery:350mah 2S Battery (Stock battery)/ 300mah 1S Battery
Flight time: 2 minutes and half with 350mAh 2S battery (smooth flight in a windless environment)
FC SPECIFICATIONS
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECIFICATIONS
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S-3S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX
Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
1 * Beta75X PNP 2S Whoop Quadcopter (with LED board)
1 * Spare 40mm 4-blades props (2CW+2CCW)
1 * Spare Canopy
Write your review
You must be logged in to post a review.
Description
This is a new era for Whoop drones. 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere. At this moment, the ESC board is updated from 10A to 12A. Supports 2S-3S battery now.
Main Features:
- Beta75X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
- With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing pro.
- Durable and light enough frame is customized for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.
- Whole drone no soldering or tinkering necessary. Customized lightest 1103 11000KV motors with cable connectors. Just plug and play.
- 350mAh 2S high rate battery is recommend by default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable
Specification
Weight: 41g (without battery)
Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Camera: Z02 AIO Camera 35 degree
Receiver Option: no include
Battery:350mah 2S Battery (Stock battery)/ 300mah 1S Battery
Flight time: 2 minutes and half with 350mAh 2S battery (smooth flight in a windless environment)
FC SPECIFICATIONS
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECIFICATIONS
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S-3S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX
Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
In The Box
1 * Beta75X PNP 2S Whoop Quadcopter (with LED board)
1 * Spare 40mm 4-blades props (2CW+2CCW)
1 * Spare Canopy
Videos
FAQ
Downloads
Reviews
Write your review
You must be logged in to post a review.