Beta85X 4s BNF (DSMX)

Beta85X comes back now with the upgraded function which can support 4S! Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely. Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!

MAIN FEATURES:

• BT2.0 Connector
  F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
• High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable.
• Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
• Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
• Installed with C01 PRO 1200TVL  camera
• Upgraded 1105 motor from 6000KV to 5000KV,  with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
• Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
• 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

BETA85X SPECIFICATIONS

Weight: 62g (without battery)

F405 V2 Flight Controller and 16A BLHeli_32 ESC

Motors: 1105 5000KV with connector

Props: 2" 4-Blades Props

Camera: C01 PRO 1200TVL

 Receiver option: DSMX

Recommend battery: 4S 450mAh Battery (Not including)

5.8G FPV antenna

Flight time: 4min - 6min with 450mAh 4S battery

FC SPECIFICATIONS

Find more details about this F405 V2 FC in another page.

CPU: STM32F405 (Overclock to 240MHz)

Six-Axis: MPU6000

Size: 26mm x 26mm, whoop mounting pattern

Firmware version: Betaflight OMNIBUSF4SD (OBSD)

OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

Find more details about this BLHeli 32 ESC board in another page.

Support BLHELI_32

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200

Input voltage: 3-4S lipo

Cotinue current: 12A

Peak current: 19A 

Firmware target: BETAFPV-16A-32bit

MCU: STM32F051K66

The primary purpose of the Beta85X drone is for a cinematic whoop drone. Many polits revamp their Beta75X to HD whoop drone--They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video. Inspired by this, we want to provide a BNF whoop drone with HD DVR camera by default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.

Output power: 25mW and 200mW (Adjustable)

Smart Audio function is included for radio control

Antenna: Customized ZRC antenna

Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz

C01 PRO Camera

 Field of view: 160 degrees with 1/3 lens

1 * Beta85X FPV Whoop Quadcopter4S BNF (DSMX) With BT2.0 connector

4* Emax Avan 2" 4 Blade props