For fans of Silverware firmware, now you could try it with brushless drone like Beta85 Pro 2. The stock firmware is based on brushed NFE_Silverware, which is used on popular ZER0 board.
After 2 months of beta test and upgrade, now it is available for all the pilots. Thanks to all the pilot s who took part in our beta test and gave us feedbacks and advice.
SPECIFICATIONS OF FC
CPU: STM32F042G6U6 (Frsky version) / STM32F031F6P6 (Bayang version)
Six-Axis: MPU6050
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPV LiteSilverware firmware
OSD: BETAFPV LiteOSD
Build-in receiver: Frsky D8 RX (SBUS protocol) / SPI Bayang
Supported external receiver: SBUS / DSMX protocol
Power Cable: 55mm, with XT30 cable
Weight: 5.39g with XT30 cable
SPECIFICATIONS OF ESC
Built-in BB21 ESC with 5A continuous and peak 6A current
Input voltage: 2S lipo
Support BLHeliSuite programmable
Motor Connectors: 1.25mm header pins connector
Factory firmware: S_H_50_REV16_7.HEX
Signal Support:D-shot150, D-shot300, D-shot600(Default), Oneshot125
1 * BetaFPV Lite 2S Flight Controller Silverware (FrSky)
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
You must be logged in to post a review.
For fans of Silverware firmware, now you could try it with brushless drone like Beta85 Pro 2. The stock firmware is based on brushed NFE_Silverware, which is used on popular ZER0 board.
After 2 months of beta test and upgrade, now it is available for all the pilots. Thanks to all the pilot s who took part in our beta test and gave us feedbacks and advice.
SPECIFICATIONS OF FC
CPU: STM32F042G6U6 (Frsky version) / STM32F031F6P6 (Bayang version)
Six-Axis: MPU6050
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPV LiteSilverware firmware
OSD: BETAFPV LiteOSD
Build-in receiver: Frsky D8 RX (SBUS protocol) / SPI Bayang
Supported external receiver: SBUS / DSMX protocol
Power Cable: 55mm, with XT30 cable
Weight: 5.39g with XT30 cable
SPECIFICATIONS OF ESC
Built-in BB21 ESC with 5A continuous and peak 6A current
Input voltage: 2S lipo
Support BLHeliSuite programmable
Motor Connectors: 1.25mm header pins connector
Factory firmware: S_H_50_REV16_7.HEX
Signal Support:D-shot150, D-shot300, D-shot600(Default), Oneshot125
1 * BetaFPV Lite 2S Flight Controller Silverware (FrSky)
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration ruber dampers
You must be logged in to post a review.