
Beta85X comes back now with the upgraded function which can support 4S! Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely. Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!
MAIN FEATURES:
- BT2.0 Connector
F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting. - High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable.
- Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
- Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
- Installed with C01 PRO 1200TVL camera
- Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
- Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
- 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.
ESPECIFICACIONES BETA85X
Peso: 62g (sin batería)
F405 V2 Flight Controller y 16A BLHeli_32 ESC
Motores: 1105 5000KV con conector.
Hélices: 2 "4- palas Props
Cámara: C01 PRO 1200TVL
Opción de receptor: DSMX Compatible
Batería recomendada: 4S 450mAh Batería (No incluida)
Antena de 5.8G FPV
Tiempo de vuelo: 4min - 6min con 450mAh batería 4S
ESPECIFICACIONES FC
CPU: STM32F405 (Overclocking a 240MHz)
Seis ejes: MPU6000
Tamaño: 26 mm x 26 mm, patrón de montaje Whoop
Versión de firmware: Betaflight OMNIBUSF4SD (OBSD)
OSD: OSD BetaFlight incorporado (STM32 controla el chip OSD a través de SPI en modo DMA)
ESPECIFICACIONES ESC
Soporte BLHELI_32
Soporte PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Voltaje de entrada: 3-4S lipo
Corriente continua: 16A
Corriente máxima: 19A
Firmware: BETAFPV-16A-32bit
MCU: STM32F051K66
Potencia de salida: 25mW y 200mW (ajustable)
La función de audio inteligente está incluida para el control de radio
Antena: antena ZRC personalizada
Frecuencia: 5.8GHz 6 bandas 48 canales, con Raceband: 5362 ~ 5945MHz
Cámara C01 PRO 1200TVL
Campo de visión: FOV 160º grados con lente 1/3
1 * Beta85X FPV Whoop Quadcopter 4S BNF (DSMX) con conector BT2.0
4* Hélices Emax Avan 2"
Escribe tu Valoración
Usted debe ser registrado para publicar una reseña.
Descripción
Beta85X comes back now with the upgraded function which can support 4S! Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely. Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!
MAIN FEATURES:
- BT2.0 Connector
F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting. - High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable.
- Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
- Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
- Installed with C01 PRO 1200TVL camera
- Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
- Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
- 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.
Datos Técnicos
ESPECIFICACIONES BETA85X
Peso: 62g (sin batería)
F405 V2 Flight Controller y 16A BLHeli_32 ESC
Motores: 1105 5000KV con conector.
Hélices: 2 "4- palas Props
Cámara: C01 PRO 1200TVL
Opción de receptor: DSMX Compatible
Batería recomendada: 4S 450mAh Batería (No incluida)
Antena de 5.8G FPV
Tiempo de vuelo: 4min - 6min con 450mAh batería 4S
ESPECIFICACIONES FC
CPU: STM32F405 (Overclocking a 240MHz)
Seis ejes: MPU6000
Tamaño: 26 mm x 26 mm, patrón de montaje Whoop
Versión de firmware: Betaflight OMNIBUSF4SD (OBSD)
OSD: OSD BetaFlight incorporado (STM32 controla el chip OSD a través de SPI en modo DMA)
ESPECIFICACIONES ESC
Soporte BLHELI_32
Soporte PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Voltaje de entrada: 3-4S lipo
Corriente continua: 16A
Corriente máxima: 19A
Firmware: BETAFPV-16A-32bit
MCU: STM32F051K66
Potencia de salida: 25mW y 200mW (ajustable)
La función de audio inteligente está incluida para el control de radio
Antena: antena ZRC personalizada
Frecuencia: 5.8GHz 6 bandas 48 canales, con Raceband: 5362 ~ 5945MHz
Cámara C01 PRO 1200TVL
Campo de visión: FOV 160º grados con lente 1/3
¿Qué Hay En la Caja?
1 * Beta85X FPV Whoop Quadcopter 4S BNF (DSMX) con conector BT2.0
4* Hélices Emax Avan 2"
Videos
FAQ
Descargas
Reseñas
Escribe tu Valoración
Usted debe ser registrado para publicar una reseña.