
THE FASTEST RADIO LINK
In a race, microseconds count. Goggles down, thumbs up - are you ready for a two-way 250Hz radio link? End to end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We took the best from Crossfire and shrunk it down & sped it up.
NOT JUST FOR RACE AND "FREERANGE" PILOTS
A single operation mode satisfies all requirements. A spine-tingling 250Hz refresh rate. Plenty of penetration and range to outperform even the most serious video link. Full telemetry capability is standard, without any range degradation! Thanks to Crossfire pedigree, drone pilots, traditional R/C pilots and everyone in between can instantly tap into the familiar lineup of compatible software, devices, remotes and mounting boards.
EASE OF USE
OTA firmware updates, auto-bind, multi-bind, LUA device configuration such as flight controller PIDs, etc. and cloud connectivity: No problem! These are all features that TBS first brought into the R/C space with TBS Crossfire! All receivers arrive in binding mode and it remembers your bind across all of your radios, so the bind button is technically not needed ever.
UNDER THE HOOD
TBS Tracer runs on the Crossfire engine. Over 6 years of active development and by far the most popular R/C system for FPV enthusiasts! You instantly tap into the same reliability, features and compatibility that drone pilots see as synonymous to peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to higher frequency. Crossfire users will feel right at home!
FEATURES:
250Hz: Fastest available radio and telemetry link.
Next generation 2.4GHz technology meets robust Crossfire radio engine
3ms end to end latency
"JR" and "LITE" form factor transmitters
Nano-sized receiver with antenna diversity
15mi+/25km+ range
For drones, planes, helicopters, cars and boats
Latencia y frecuencia de actualización: 3ms, 250Hz
Potencia de salida: 25mW / 100mW
Bandas de frecuencia: 2.4GHz ISM
Voltaje de entrada: 5 - 13V
Conector: USB-C
Consumo de energía: 1.1W (@10mW) - 2W (@100mW)
Compatibilidad de radio: bahía del módulo LITE (TBS Tango 2, Taranis X-Lite, X9 Lite). OpenTX V2.1+
Se sugiere el uso del TBS Tracer Nano TX en controles remotos Futaba y Spektrum que no tienen una bahía de módulo JR
1 x TBS Tracer Nano TX
Escribe tu Valoración
Usted debe ser registrado para publicar una reseña.
Descripción
THE FASTEST RADIO LINK
In a race, microseconds count. Goggles down, thumbs up - are you ready for a two-way 250Hz radio link? End to end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We took the best from Crossfire and shrunk it down & sped it up.
NOT JUST FOR RACE AND "FREERANGE" PILOTS
A single operation mode satisfies all requirements. A spine-tingling 250Hz refresh rate. Plenty of penetration and range to outperform even the most serious video link. Full telemetry capability is standard, without any range degradation! Thanks to Crossfire pedigree, drone pilots, traditional R/C pilots and everyone in between can instantly tap into the familiar lineup of compatible software, devices, remotes and mounting boards.
EASE OF USE
OTA firmware updates, auto-bind, multi-bind, LUA device configuration such as flight controller PIDs, etc. and cloud connectivity: No problem! These are all features that TBS first brought into the R/C space with TBS Crossfire! All receivers arrive in binding mode and it remembers your bind across all of your radios, so the bind button is technically not needed ever.
UNDER THE HOOD
TBS Tracer runs on the Crossfire engine. Over 6 years of active development and by far the most popular R/C system for FPV enthusiasts! You instantly tap into the same reliability, features and compatibility that drone pilots see as synonymous to peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to higher frequency. Crossfire users will feel right at home!
FEATURES:
250Hz: Fastest available radio and telemetry link.
Next generation 2.4GHz technology meets robust Crossfire radio engine
3ms end to end latency
"JR" and "LITE" form factor transmitters
Nano-sized receiver with antenna diversity
15mi+/25km+ range
For drones, planes, helicopters, cars and boats
Datos Técnicos
Latencia y frecuencia de actualización: 3ms, 250Hz
Potencia de salida: 25mW / 100mW
Bandas de frecuencia: 2.4GHz ISM
Voltaje de entrada: 5 - 13V
Conector: USB-C
Consumo de energía: 1.1W (@10mW) - 2W (@100mW)
Compatibilidad de radio: bahía del módulo LITE (TBS Tango 2, Taranis X-Lite, X9 Lite). OpenTX V2.1+
Se sugiere el uso del TBS Tracer Nano TX en controles remotos Futaba y Spektrum que no tienen una bahía de módulo JR
¿Qué Hay En la Caja?
1 x TBS Tracer Nano TX
Videos
FAQ
Reseñas
Escribe tu Valoración
Usted debe ser registrado para publicar una reseña.