
Building off of the success of the Vortex 285, and listening to the dreams and wishes of our customers, the ImmersionRC team designed the Vortex 250 Pro, a purebred racer which ticks all of the boxes.
We swapped out the ‘F1’ processor for the ‘F3’, added an integrated Black Box recorder, swapped out the 1806 motors for potent 2204/2300kV custom motors, Gen2, 20A ESCs, Serial receiver support… the list is long and colorful.
Fusion Gen2 Flight Controller
The ImmersionRC Fusion, a highly integrated state-of-the-art flight controller, gets an extensive update for the Vortex 250.
The ‘F1’ class processor is updated to an F3, flash memory for BlackBox log storage is integrated, the buzzer is replaced with one MUCH louder, and a port is added for direct serial receiver hookup (5V and 3.3v supply options).
As for the Fusion Gen1, the Gen2 is pre-loaded with a custom build of CleanFlight, and is future-proof, supporting future updates.
The high performance ‘F3’ processor provides > 2x the performance of it’s predecessor, allowing lower loop times, and better flight performance.
PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx.
Integrated 5.8GHz Video Tx with RaceBand
An on-board NexWaveRF 5.8GHz video transmitter, with 40 channel support, ensures compatibility with any 5.8Ghz A/V Rx on the market.
New for the Vortex 250, is Dynamic Power Control. Transmitter power is lowered automatically when the quad is disarmed, or ready for a race to start, to reduce interference to other pilots.
ImmersionRC’s exclusive RaceBand allows 8 pilots to fly together, while being 100% legal for US resellers to distribute. All channels fall within the legal US Ham band.
The on-board OSD allows video transmitter channels to be chosen using the R/C transmitter, no more dip-switches to flip, and no more frequency lists to remember.
Full compatibility with all ImmersionRC/FatShark, Boscam, Team Black-Sheep, DJI, and ImmersionRC RaceBand channels.
Full Graphic OSD, with EzOSD pedigree
An on-board full-graphic OSD provides in-flight updates of critical parameters, and sports a menu which allows all options to be programmed in the field using the R/C Tx, and a set of goggles, or an LCD screen.
A real-time interface with the flight controller enables artificial horizons, F-18 style displays, and exchange of flight parameters.
Weight: ~415g without battery, or HD camera
Power Requirements: 3s-4s LiPo (typical)
ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
Motors: Custom V-Spec 2204-2300kV, with 3mm axles, 5mm shafts
Props: OEM Gemfan 5045 GF Blunt-Nose
Flight Camera: FatShark 700TVL v2 CMOS (included)
HD Camera: GoPro Hero, Hero 3/4
Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)
Flight Time: Highly dependent upon battery, and flying style
Tx: 350mw.
Note: Compatible receiver and display device required for initial setup and use, not included.
1x Vortex 250 Pro Race Quad, Fully assembled and tested
1x Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets
2x ImmersionRC Branded battery straps (Installed)
1x SpiroNET Omni 5.8GHz antenna
1x PPM Interface Cable
1x Spektrum(tm) Interface Cable
1x SBus Interface Cable
8x OEM Gemfan 5045BN GFK Props
BETA FIRMWARE
(Unofficial – Full & final testing may not have been carried out on beta release firmware, use with caution!)
UTILITY SOFTWARE
Write your review
You must be logged in to post a review.
Description
Building off of the success of the Vortex 285, and listening to the dreams and wishes of our customers, the ImmersionRC team designed the Vortex 250 Pro, a purebred racer which ticks all of the boxes.
We swapped out the ‘F1’ processor for the ‘F3’, added an integrated Black Box recorder, swapped out the 1806 motors for potent 2204/2300kV custom motors, Gen2, 20A ESCs, Serial receiver support… the list is long and colorful.
Fusion Gen2 Flight Controller
The ImmersionRC Fusion, a highly integrated state-of-the-art flight controller, gets an extensive update for the Vortex 250.
The ‘F1’ class processor is updated to an F3, flash memory for BlackBox log storage is integrated, the buzzer is replaced with one MUCH louder, and a port is added for direct serial receiver hookup (5V and 3.3v supply options).
As for the Fusion Gen1, the Gen2 is pre-loaded with a custom build of CleanFlight, and is future-proof, supporting future updates.
The high performance ‘F3’ processor provides > 2x the performance of it’s predecessor, allowing lower loop times, and better flight performance.
PIDs are adjusted on-screen, in easy-to-use menus, driven directly from the R/C Tx.
Integrated 5.8GHz Video Tx with RaceBand
An on-board NexWaveRF 5.8GHz video transmitter, with 40 channel support, ensures compatibility with any 5.8Ghz A/V Rx on the market.
New for the Vortex 250, is Dynamic Power Control. Transmitter power is lowered automatically when the quad is disarmed, or ready for a race to start, to reduce interference to other pilots.
ImmersionRC’s exclusive RaceBand allows 8 pilots to fly together, while being 100% legal for US resellers to distribute. All channels fall within the legal US Ham band.
The on-board OSD allows video transmitter channels to be chosen using the R/C transmitter, no more dip-switches to flip, and no more frequency lists to remember.
Full compatibility with all ImmersionRC/FatShark, Boscam, Team Black-Sheep, DJI, and ImmersionRC RaceBand channels.
Full Graphic OSD, with EzOSD pedigree
An on-board full-graphic OSD provides in-flight updates of critical parameters, and sports a menu which allows all options to be programmed in the field using the R/C Tx, and a set of goggles, or an LCD screen.
A real-time interface with the flight controller enables artificial horizons, F-18 style displays, and exchange of flight parameters.
Specification
Weight: ~415g without battery, or HD camera
Power Requirements: 3s-4s LiPo (typical)
ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
Motors: Custom V-Spec 2204-2300kV, with 3mm axles, 5mm shafts
Props: OEM Gemfan 5045 GF Blunt-Nose
Flight Camera: FatShark 700TVL v2 CMOS (included)
HD Camera: GoPro Hero, Hero 3/4
Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)
Flight Time: Highly dependent upon battery, and flying style
Tx: 350mw.
Note: Compatible receiver and display device required for initial setup and use, not included.
In The Box
1x Vortex 250 Pro Race Quad, Fully assembled and tested
1x Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets
2x ImmersionRC Branded battery straps (Installed)
1x SpiroNET Omni 5.8GHz antenna
1x PPM Interface Cable
1x Spektrum(tm) Interface Cable
1x SBus Interface Cable
8x OEM Gemfan 5045BN GFK Props
Videos
FAQ
Downloads
FIRMWARE
BETA FIRMWARE
(Unofficial – Full & final testing may not have been carried out on beta release firmware, use with caution!)
UTILITY SOFTWARE
Reviews
Write your review
You must be logged in to post a review.