The Holybro Kakute G4 AIO FC w/ 35A ESC is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power. It also works with analog systems due to the onboard OSD chip. The FC on this AIO uses a G4 processor, and the 4in1 ESC uses four F4 processors running AM32 firmware.
It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX, and 35A 4in1 ESC, all in a small form factor weighing only 7.5g.
It also comes in a super-hydrophobic nano-waterproof coating. This coating allows air to pass through while avoiding water, giving extra protection from moisture and other elements.
Features
AIO board with G4 Processor FC & F4 ESC
35A ESC running AM32 firmware, capable of up to 6S
10V/2.5A BEC for DJI O3 Air Unit
Digital VTX port
Superhydrophobic Nano Coating
Controlador de vuelo
- MCU: STM32G473
- Gyro: ICM42688
- Baro: DPS310
- BEC
- 5V/3A
- 10V/2,5 A
- Caja negra: 128 MB (16 MB) de flash
- OSD: AT7456
- UART: 5 en total
ESC 4 en 1:
- Firmware AM32 con MCU F4
- Firmware de código abierto
- Firmware actualizable a través de Betaflight passthrough (asegúrese de que su firmware de Betaflight esté actualizado cuando intente usar passthrough)
- Artículo que explica AM32 por Oscar Liang
- Voltaje de entrada: 2S-6S
- Para el voltaje de entrada por debajo de 4S, no se puede usar la salida de 10V BEC
- Para el voltaje de entrada por debajo de 3S, no se puede usar la salida BEC de 10 V y 5 V
- Frecuencia PWM de 8k a 48k
- Ayuda
- DShot 150/300/600/1200
- MultiShot/OneShot/Proshot/PWM, etc.
- Telemetría ESC
- Sensor de corriente analógico integrado
- MOSFET de metal para una mejor disipación de calor
Especificación mecánica
- Montaje - Agujero de 25 x 25 mm/Φ3 mm con ojales de Φ2 mm
- Dimensión - 33x33mm
- Peso - 7,5 g
The Holybro Kakute G4 AIO FC w/ 35A ESC is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power. It also works with analog systems due to the onboard OSD chip. The FC on this AIO uses a G4 processor, and the 4in1 ESC uses four F4 processors running AM32 firmware.
It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX, and 35A 4in1 ESC, all in a small form factor weighing only 7.5g.
It also comes in a super-hydrophobic nano-waterproof coating. This coating allows air to pass through while avoiding water, giving extra protection from moisture and other elements.
Features
AIO board with G4 Processor FC & F4 ESC
35A ESC running AM32 firmware, capable of up to 6S
10V/2.5A BEC for DJI O3 Air Unit
Digital VTX port
Superhydrophobic Nano Coating
Recommend Products
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
