Quick Setting Metal Epoxy Adhesive is perfect for repairing appliances, tools, etc. It bonds most metals including copper, steel, stainless steel, aluminum, brass and iron. This product sets in only 5 minutes and the final cure color is light gray.

Works Best On: Aluminum, Brass, Copper, Iron, Stainless Steel, Steel

Features:

• Initial color: Light gray

• Final color: Hazy-clear

• Maximum Gap: .25”

• Hardness, Shore D: 75-85 (After full cure)

• Shear Strength, Steel: 2500 psi (± 20%); Aluminum: 840 psi (± 20%)

• Set Time: 4-6 minutes @ 65-80°F

• Handling Time: After 1 hour

• Full Strength: 24 hours

• Operating Temperature Range:-40 to 300°F (-40 to 149°C)

• High quality Made in USA, Pacer Technology manufactures other brands like ZAP, Super Glue, Pro Seal.
  

Use Instructions:

1. Surfaces should be clean and dry, free from oil and grease.

2. Roughen surfaces with emery cloth or sandpaper for best results.

3. Dispense from container following package directions & mix thoroughly until color is uniform, approximately 1 minute.

4. Apply to both surfaces and mate parts together.

5. Remove excess epoxy immediately with denatured alcohol.

6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.