Gel Quick Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product fills gaps and covers large, porous surfaces. The final cure color is cream but can be mixed with paint to color match.  This product sets in only 5 minutes.  Bonds most plastics, pottery, tile, rubber,  wood and metal. Also a great  glue for repairing shoes.

Works Best On: Carpet, Ceramic, Crafts, Metal, Most Plastics, Porous Materials, Pottery, Rubber, Tile, Wood

Features:

• Initial color: Green resin/hazy white  hardener

• Final color: cream

• Maximum Gap: .25”

• Hardness, Shore D: 75-85 (After full cure)

• Shear Strength, Steel: 1500 psi (± 20%); Aluminum: 900 psi (± 20%)

• Set Time: 4-6 minutes @ 65-80°F

• Handling Time: After 1 hour

• Full Strength: 24 hours

• Operating Temperature Range:-40 to 300°F (-40 to 149°C)

• High quality Made in USA, Pacer Technology manufactures other brands like ZAP, Super Glue, Pro Seal...
  

Use Instructions:

1. Surfaces should be clean and dry, free from oil and grease.

2. Roughen surfaces with emery cloth or sandpaper for best results.

3. Dispense from container following package directions & mix thoroughly until color is uniform, approximately 1 minute.

4. Apply to both surfaces and mate parts together.

5. Remove excess epoxy immediately with denatured alcohol.

6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.