Instant Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. The product will set in 90 seconds and can be handled after 10 minutes. 2000 psi strength is ideal for bonding small parts.

Works Best On: All-Purpose, Ceramic, China, Crafts, Fabric, Fiberglass, Glass, Metal, Most Plastics, Pottery, Tile, Wood

Technical Specifications:

• Initial color: Clear hazy to lightyellow

• Final color: Light yellow

• Set Time: 90 seconds @ 65-80°F

• Handling Time: After 10 minutes

• Full Strength: 24 hours

• Maximum Gap: .25″

• Hardness, Shore D: 65-80 (After full cure)

• Shear Strength, Steel: 2000 psi ( 20%)

• Operating Temperature Range: -40°F to +176°F (-40°C to +80°C)

• High quality Made in USA, Pacer Technology manufactures other brands like ZAP, Super Glue, Pro Seal...

Use Instructions:

1. Surfaces should be clean and dry, free from oil and grease.

2. Roughen surfaces with emery cloth or sandpaper for best results.

3. Dispense from container following package directions and mix thoroughly until color is uniform.

4. Apply to both surfaces and mate parts together.

5. Remove excess epoxy immediately with denatured alcohol.

6. Sets in 90 seconds at room temperature (77°F or 25°C) with full cure in 24 hours.